WiFi
Installation
Please study the instruction step by step before connecting WiFi equipment.
Remarks : In case of your computer notebook does not have equipment
to access WiFi, please contact the reception counter.
| 1. |
Check a slot for PCMCIA card which is fixed at a side of notebook. In case you not found it, it means you can not use and connect to the WiFi system. |
| 2. |
Check all required equipments which obtained from counter service from the below list
2.1 "ZyAIR B-120" CD-Rom (Driver for WiFi Card)
2.2 WiFi card |
| 3. |
Please follow these steps before inserting WiFi Card into Notebook. |
| 4. |
Turn on notebook and wait until successfully access to window. |
| 5. |
Insert CD Driver (ZyAIR B-120), installation program will
be automatically loaded. |
| 6. |
In case the program does not automatically work
6.1 Click "Start" at Window Program
6.2 Select "Run"
6.3 Then Popup Windows will show up to enter command
6.4 Type "CD-Rom Drive:/setup". For example, if you
insert CD into Drive D, you must type "D:/setup"
6.5 Click "OK" |
| 7. |
During installation, when any messages appear, please click
"Next", "OK" or "Finish" until
finish. |
| 8. |
Normally, there is no error during installation. If occurs,
please contact our customer service to solve the problem. |
| 9. |
After installation completed, please shut down your notebook. |
| 10. |
Insert WiFi card into the PCMCIA slot and turn on your notebook
again. |
| 11. |
It may take 5-10 minutes in order to restart your notebook (Based on your notebook capacity). If error, please contact our Customer Service. |
| 12. |
After the program has been completely installed, a symbol "Z" (in green colour) in the system tray at the lower right-hand corner of the screen will appear. First, Symbol "Z" is in red color for 1-2 minutes and then turns to green. |
| 13. |
Now you can access internet CyberPoint. |
Should there be any enquiries during installation, please contact
our customer service Tel. 0-2100-3999 |
